-
Variations
Art. 3010187, grey-black
* other colors available on request -
Packing unit:
Individual packaging
-
Dimensions (L x W x H)
150 x 38 x 20 mm
-
Product weight
69 g, grey-black
-
Cutting depth
22 mm
-
Base material
plastic
-
Security level
MIDI
Fully automatic blade retraction -
EAN-Code
Art. 3010187: 4251946400546
-
Customs tariff number
82119300
Cutting of:
Foil, cardboard, strapping tape, adhesive tape, paper.
Cutter is suitable for right- and left-handed people.
The replacement blades are supplied in dispensers of 10 each.
H10002, trapezoidal blade (usable on 2 sides, interchangeable)
H10005, rounded trapezoid blade (usable on 2 sides, interchangeable)
Product data sheet
Safety instructions
Please read the instructions carefully and keep them to ensure prolonged and safe use of our cutting tools.
This product is only approved for manual cutting and must not be used for purposes other than those for which it is intended. Care must be taken to ensure correct handling and use.
Avoid injury: Only use cutting tools that are in good condition and have sharp, undamaged blades. Exercise caution when handling this product. Be sure to familiarise yourself with its handling and operation beforehand. The sharp blade can cause serious cuts. Do not hold the blade, do not place your other hand along the cutting path of the cutter and always cut past your body. Replace blunt blades quickly and dispose of them properly.
Tighten the cutter to avoid injury. Store the cutter in a safe place.
Keep the cutter clean and do not expose it unnecessarily to dust, dirt and moisture to ensure longevity.
No liability is accepted for consequential damage.
Subject to technical changes and errors!
This product should not be used by children!
Product highlights of our Archives
The fully automatic blade retraction on safety knives offers you a high level of protection against injuries. This works even if the user is still holding the slider. The blade is always retracted fully automatically into the handle after the cutting process as soon as it leaves the material to be cut.
At CUTX, we are proud to do our part. All safety knives in our standard
gray range are made from 95% recycled plastic. By using renewable
energies and short transport routes to our local partners, we guarantee the
conservation of valuable resources.
Our CUTX Safety Knives are designed to be optimally prepared for the
recycling process. We have deliberately minimized the variety of raw
materials used and have eliminated two-component plastics that prove
difficult to separate. This allows for an easy separation of materials that
can be reused in the production of new plastics.
You too can be part of this sustainable initiative. Send us your used CUTX
Safety Knives and we will recycle them properly.
The blade of the Automatic One CUTX MIDI X8080 can be reversed or replaced. The cutter itself can accompany you for a long time.
As the blade can be used on both sides, the Automatic One CUTX MIDI X8080 is an extremely durable safety knife with low costs. There are different types of blades depending on your preferences and requirements.
Slide out the blade, attach, cut. The fully automatic blade retraction ensures that the blade automatically slides back into the housing as soon as the clippings are removed. Even if you continue to hold the slider!
Our articles are also available in your desired colors. They can also be printed so that you have an excellent and individual advertising medium that your customers will certainly want to pick up again and again.
Slide out the blade, attach and cut. The automatic blade retraction ensures that the blade automatically slides back into the housing as soon as the clippings are removed.
Take care when changing blades! Risk of injury!
To change the blade, turn the screw at the end of the handle to the left, push the blade forward on the upper slider, carefully grasp the blade between your thumb and index finger and pull it gently towards the upper narrow side of the housing. This releases the blade holder and you can pull it forwards out of the housing. Carefully grasp the blade between your thumb and index finger, lift it upwards and pull it out to the front to turn it over or replace it.
Insert the blade by pushing it into the blade holder as far as it will go, press the top cover firmly and push the blade holder back into the slider. Press the holder down briefly to lock it in place. Then you can push the slide back into the housing and turn the screw at the end of the handle to the upper point. Finished.
Our all-purpose cutter for all cutting jobs
Our Automatic One X8080 is sure to be a loyal helper in your warehouse too, as it combines maximum safety with efficiency. Like the MAX 6060 and the MAX 40mm X6040, the Automatic One X8080 can be operated from above or from the side. The fully automatic blade retraction ensures that the blade slides back into the housing as soon as the cutting process has been completed, even when the slider is pushed forward. The ergonomic design ensures fatigue-free working and facilitates intensive use when cutting strapping, film, paper/cardboard/cardboard, adhesive tape. For right- and left-handed people. Low costs thanks to interchangeable blades that can be used on both sides. Various blade types available!
